Manufacturing Hydraulic Power Units and Systems   From the idea to the end product- all from a single source Our Offer price-optimized modular systems for standard hydraulic power units use of brand products joint task elaboration by technical dialogues use of perfectly suitable components regarding to efficiency and quality documentation according to current machinery directives design via state-of-the-art CAD technology by Autodesk  
Hydraulic Power Units    Tank types steel stainless steel plastic ATEX   Type of drive electrical drive combustion engine drive electrical frequency-controlled drive   Type of pumps submersible pumps on-top pumps beside-tank pumps constant volume flows variable volume flows    Documentation CAD circuit plan parts list manuals maintenance plan component overview certificates
Equipment Options built-up switch cabinets pump controls load-sensing version frequency converter accumulators cooler o oil/air cooler o oil/water cooler heating rods control blocks vertical stack systems valves o switch valves o proportional valves o control valves blocks o 2-way block o Cartridge blocks    Parameter pressure up to 700 bar unlimited volume unlimited nominal sizes  
Systems    System Types open hydraulic circuit closed hydraulic circuit for mobile application for stationary application   Range of Performance new design of entire plants optimizing existing plants comprehensive, international documentation electrical control and regulation use of control blocks, vertical stack systems, servo and proportional valves as well as 2-way and cartridge blocks automation and remote maintenance installation by our employees own piping and tubing, preferably with System Parker EO2,EO2 Form and Parkrimp commissioning technical briefing maintenance  
Large hydraulic power unit with container and switch cabinet on an oil sump. Employee creates a CAD model of an hydraulic power unit Yellow hydraulic power unit with filling pump and cooler. Newly installed pump line inclusive transmission for a drilling device. Large lifting unit for a forming die in the automotive industry. Employee creates a CAD model of an hydraulic power unit individually planned and manufactured perfectly adjusted to your application
Our approach    The   power   unit   is   the   heart   of   a   hydraulic   plant.   This   and   the   control   build   the   framework   of   a   hydraulic plant.   The   technical   design   is   mostly   determined   by   the   task   of   the   plant   and   the   operating   conditions.   We accompany    the    entire    life    cycle    of    your    plant-    from    the    idea    to    processing    the    task,    the    set-up,    the commissioning    and    finally    to    decommissioning.    With    you    as    a    partner,    we    process    a    solution    that    is technically   and   energetically   viable   for   the   task.   During   project   planning   we   create   a   3D   model   on   which, upon request, FEM analysis can be made. 
Technischer Dialog; Fünf Personen im Halbkreis über einen Schaltplan auf einem Tisch gebeugt, im Hintergrund eine Leinwand mit 3D-Modell eines Hydraulikaggregates Blick von oben auf ein System in einer Erzverarbeitungsanlage, bestehend aus großem Aggregat und hydraulisch verschiebbaren Transportband
We   deliver   all   over   the   world   and   also   within   regions   with   difficult   climatic   surroundings.   There   is   no   limit   to the   tank   size,   although   it   is   influenced   by   transport   and   placement   conditions-   up   to   now   a   tank   capacity   of 2000   l   was   produced.   According   to   use,   the   implementation   is   possible   in   open   or   closed   circuit,   whereas   the closed   circuit   can   be   reasonably   used   in   test   benches.   Piping   can   be   done   with   different   systems,   preferably with   EO2   or   EO2-FORM.   During   assembly,   all   pipes   are   cleaned   with   jet   cleaner   and   if   required   the   complete piping   system   is   rinsed   in   the   process   of   commissioning.   Simple   as   well   as   complex   custom-made   control blocks   can   be   implemented-   a   PLC   can   be   built   in   on   request.   You   can   choose   from   the   entire   range   of   RAL colours for your choice of colouring. You    receive    a    plant-specific    documentation    according    to    machine    guidelines.    This    comprises    operating manual,   assembly   manual,   as   well   as   technical   documents-   the   revised   hydraulic   circuit   plan,   the   parts   list, data sheets and the commissioning protocol.
Specialist company for hydraulic components and systems
Quality management according  DIN EN ISO 9001
Manufacturing Hydraulic Power Units and Systems   From the idea to the end product - all from a single source   Our Offer: price-optimized modular systems for standard hydraulic power units use of brand products joint task elaboration by technical dialogues use of perfectly suitable components regarding to efficiency and quality documentation according to current machinery directives design via state-of-the-art CAD technology by Autodesk individually planned and manufactured perfectly adjusted to your application  
Hydraulic Power Units      Tank types steel stainless steel plastic ATEX   Type of drive electrical drive combustion engine drive electrical frequency- controlled drive    Equipment Options built-up switch cabinets pump controls load-sensing version frequency converter accumulators cooler o oil/air cooler o oil/water cooler heating rods control blocks vertical stack systems valves o switch valves o proportional valves o control valves blocks o 2-way block o Cartridge blocks
 Type of pumps submersible pumps on-top pumps beside-tank pumps constant volume flows variable volume flows Documentation CAD circuit plan parts list manuals maintenance plan component over- view certificates     Parameter pressure up to 700 bar unlimited volume unlimited nominal sizes  
Systems    System Types open hydraulic circuit closed hydraulic circuit for mobile application for stationary application   Range of Performance new design of entire plants optimizing existing plants comprehensive, international documentation electrical control and regulation use of control blocks, vertical stack systems, servo and proportional valves as well as 2-way and cartridge blocks automation and remote maintenance installation by our employees own piping and tubing, preferably with System Parker EO2,EO2 Form and Parkrimp commissioning technical briefing maintenance  
individually planned and manufactured  perfectly adjusted to your application
Our approach    The   power   unit   is   the   heart   of   a   hydraulic   plant.   This and   the   control   build   the   framework   of   a   hydraulic plant.   The   technical   design   is   mostly   determined   by the   task   of   the   plant   and   the   operating   conditions. We   accompany   the   entire   life   cycle   of   your   plant- from   the   idea   to   processing   the   task,   the   set-up,   the commissioning   and   finally   to   decommissioning.   With you    as    a    partner,    we    process    a    solution    that    is technically    and    energetically    viable    for    the    task. During   project   planning   we   create   a   3D   model   on which, upon request, FEM analysis can be made. 
We   deliver   all   over   the   world   and   also   within   regions with   difficult   climatic   surroundings.   There   is   no   limit to     the     tank     size,     although     it     is     influenced     by transport   and   placement   conditions-   up   to   now   a tank   capacity   of   2000   l   was   produced.   According   to use,    the    implementation    is    possible    in    open    or closed    circuit,    whereas    the    closed    circuit    can    be reasonably   used   in   test   benches.   Piping   can   be   done with   different   systems,   preferably   with   EO2   or   EO2- FORM.   During   assembly,   all   pipes   are   cleaned   with jet    cleaner    and    if    required    the    complete    piping system   is   rinsed   in   the   process   of   commissioning. Simple    as    well    as    complex    custom-made    control blocks   can   be   implemented-   a   PLC   can   be   built   in   on request.   You   can   choose   from   the   entire   range   of RAL colours for your choice of colouring.
You       receive       a       plant-specific       documentation according    to    machine    guidelines.    This    comprises operating    manual,    assembly    manual,    as    well    as technical    documents-    the    revised    hydraulic    circuit plan,      the      parts      list,      data      sheets      and      the commissioning protocol.
Technischer Dialog; Fünf Personen im Halbkreis über einen Schaltplan auf einem Tisch gebeugt, im Hintergrund eine Leinwand mit 3D-Modell eines Hydraulikaggregates Blick von oben auf ein System in einer Erzverarbeitungsanlage, bestehend aus großem Aggregat und hydraulisch verschiebbaren Transportband
Specialist company for hydraulic components and systems
Quality management according  DIN EN ISO 9001
Terms and Conditions